Pneumatic Forging Hammer
Our pneumatic forging hammer from 9kg to 75kg are widely used by blacksmith for the art forging,from 150kg to 2000kg are widely used in the industrial forging.
Pneumatic forging hammer is widely used for general Forging works, such as drawing-out, upsetting, punching, chiseling, forging welding, bending and twisting. It is also used for forging in bolster dies.
Features:
1. Unlike steam hammers or air hammers fed from a supplementary compressor, the Pneumatic forging hammer with its self-contained cylinder,require no ancillary power raising plant.
2. The Pneumatic forging hammer is equipped with a self-priming lubricating oil pump, during operating, it can realize the automatic lubrication.
3. Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired.
Parameters
The main technical parameter of industrial pneumatic forging hammer
|
Model |
C41-150 |
C41-250 |
C41-400 |
C41-560 |
C41-750 |
C41-1000 |
C41-2000 |
Weight of
falling parts(kg) |
150 |
250 |
400 |
560 |
750 |
1000 |
2000 |
Max hit energy(kj) |
2.5 |
5.6 |
9.5 |
13.7 |
19 |
27 |
54 |
Hit number(min-1) |
180 |
140 |
120 |
115 |
105 |
95 |
80 |
Heigh of
working area(mm) |
370 |
450 |
530 |
600 |
670 |
800 |
1000 |
Tup axis to
frame front(mm) |
350 |
420 |
520 |
550 |
750 |
770 |
950 |
Dimension of top
die surface(mm) |
200x85 |
220x100 |
250x120 |
300x140 |
330x160 |
365x180 |
400x300 |
Size of bottom
die surface (mm)
|
200x85 |
220x100 |
250x120 |
300x140 |
330x160 |
365x180 |
400x300 |
Forges |
Square(mm) |
130x130 |
145x145 |
220x220 |
270x270 |
270x270 |
290x290 |
350x350 |
Round(mm) |
Φ145 |
Φ175 |
Φ240 |
Φ280 |
Φ300 |
Φ320 |
Φ400 |
Motor |
Type |
Y180M-4-B3 |
Y180L-4-B3 |
Y200L-4-B3 |
Y280S-6-B3 |
Y280M-6-B3 |
Y315S-6-B3 |
Y315L2-6-B3 |
Power(kw) |
18.5 |
22 |
30 |
45 |
55 |
75 |
132 |
Weight
Kg
|
Hammer |
3260 |
5000 |
8000 |
9800 |
17000 |
20000 |
48000 |
Anvil block |
1500 |
2500 |
4800 |
6720 |
9000 |
13000 |
24000 |
Outside Size cm |
239x108.5
x215 |
263.9x115.5
x254 |
278.5x140
x288.4 |
346.4x150
x315.7 |
390.5x137
x317.5 |
412.5x150
x377 |
420x230
x439 |
The main technical parameter blacksmith pneumatic forging hammer
|
Model |
C41-9 |
C41-15 |
C41-25 |
C41-40 |
C41-55 |
C41-75 |
Weight of falling parts (kg) |
9 |
15 |
25 |
40 |
55 |
75 |
Maximum hit energy(kj) |
0.09 |
0.16 |
0.27 |
0.53 |
0.7 |
1 |
Diameter of the
working cylinder(mm) |
100 |
115 |
165 |
200 |
215 |
210 |
Diameter of the
compressing cylinder(mm) |
105 |
125 |
170 |
205 |
220 |
240 |
Hit number (min-1) |
245 |
245 |
250 |
245 |
230 |
210 |
Height of working area (mm) |
135 |
160 |
240 |
230 |
270 |
300 |
Tup axis to frame front (mm) |
120 |
140 |
200 |
235 |
270 |
280 |
Dimension of top
die surface(L x W) (mm) |
60x35 |
70x40 |
100x50 |
116x53 |
135x60 |
145x65 |
Dimension of bottom
die surface(L x W)(mm) |
60x35 |
70x40 |
100x50 |
116x53 |
135x60 |
145x65 |
Maximum round steel can
be forged(Diameter)(mm) |
30 |
35 |
48 |
68 |
75 |
85 |
Maximum square steel
can be forged(mm) |
25x25 |
30x30 |
40x40 |
52x52 |
60x60 |
65x65 |
Distance from bottom
die surface to base(mm) |
325 |
370 |
410 |
500 |
610 |
750 |
Machine floor
space(L x W)(mm) |
790x550 |
850x500 |
1320x610 |
1265x1470 |
1435x1650 |
1430x1478 |
Machine height
(above the ground) (mm) |
950 |
980 |
1300 |
1390 |
1590 |
1853 |
Motor |
Type |
Y90L-4 |
Y100L-4 |
Y112M-6 |
Y132MI-6 |
Y132M2-6 |
Y160M-6 |
Rate power(kw) |
1.5 |
2.2 |
3 |
4 |
5.5 |
7.5 |
Speed(r/min-1) |
1400 |
1400 |
970 |
960 |
960 |
970 |
Total weight of
the hammer (kg) |
250 |
290 |
720 |
860 |
1300 |
2500 |